R&D Manco
340 N. 51st Ave
Phoenix, AZ 85043

602-278-7700
HAAS VF-3SS - Super Speed Vertical Machining Center



Super Speed Vertical Machining Center
• 40" X 20" X 25" (1016 X 508 X 635 mm)
• 40 taper
• 30 hp (22.4 kW) vector drive
• 12K rpm, inline direct-drive
• High-speed 24+1 side-mount tool changer
• 1400 ipm (35.6 m/min) rapids
• 1 MB program memory
• 15" color LCD Monitor
• USB port
• Memory lock keyswitch
• Rigid tapping
• 55-gallon (208 liter) flood coolant system.

  Back to Equipment List
 
TRAVELS S.A.E. METRIC
X Axis 40 "  1016 mm
Y Axis 20 "  508 mm
Z Axis 25 "  635 mm
Spindle Nose to Table (~ max) 29 "  737 mm
Spindle Nose to Table (~ min) 4 "  102 mm
TABLE S.A.E. METRIC
Length 48 "  1219 mm
Width 18 "  457 mm
T-Slot Width 5/8 "  16 mm
T-Slot Center Distance 3.15 "  80.0 mm
Number of Std T-Slots 5   5
Max Weight on Table (evenly distributed) 1750 lb  794 kg
SPINDLE S.A.E. METRIC
Max Rating 30 hp  22.4 kW
Max Speed 12000 rpm  12000 rpm
Max Torque 90 ft-lb @ 2000 rpm  122 Nm @ 2000 rpm
Drive System Inline Direct-Drive   Inline Direct-Drive
Taper CT or BT 40   CT or BT 40
Bearing Lubrication Air/Oil Injection   Air/Oil Injection
Cooling Liquid Cooled   Liquid Cooled
FEEDRATES S.A.E. METRIC
Rapids on X 1400 in/min  35.6 m/min
Rapids on Y 1400 in/min  35.6 m/min
Rapids on Z 1400 in/min  35.6 m/min
Max Cutting 833 in/min  21.2 m/min
AXIS MOTORS S.A.E. METRIC
Max Thrust X 3085 lb  13723 N
Max Thrust Y 3085 lb  13723 N
Max Thrust Z 3923 lb  17450 N
TOOL CHANGER S.A.E. METRIC
Type SMTC   SMTC
Capacity 24+1   24+1
Max Tool Diameter (adjacent empty) 5 "  127 mm
Max Tool Diameter (full) 3 "  76 mm
Max Tool Length (from gage line) 11 "  279 mm
Max Tool Weight 12 lb  5.4 kg
Tool-to-Tool (avg) 1.6 sec  1.6 sec
Chip-to-Chip (avg) 2.2 sec  2.2 sec
GENERAL S.A.E. METRIC
Air Required 4 scfm, 100 psi  113 L/min, 6.9 bar
Coolant Capacity 55 gal  208 L


Home | About R&D Manco | Facility | Equipment | Engineering | Manufacturing | Quality Control
Photo Gallery | Career Opportunities | Contact